Wednesday , November 20th 2019
    Build and Fly

Matek F405-STD Flight Controller Board STM32F405 Built-in OSD DShot Outputs&4PCS M3 Anti-Vibration Standoffs

Product Features:

    Specification -MCU: 168MHz STM32F405RGT6 -IMU: 32K ICM20602 gyro/accelerometer (SPI) -Baro: BMP280 (I2C) -OSD: BetaFlight OSD w/ AT7456E chip -Blackbox: MicroSD card slot (SD/SDHC) -VCP, UART1, UART2, UART3, UART4, UART5 -Built in inverter for SBUS input (UART2-RX) -PPM/UART Shared: UART2-RX -SoftSerial on TX2, S5 or S6 optional -Camera control on…
Price as on: 2019-02-19 17:43:45
42.89  

Product Description

Specification
-MCU: 168MHz STM32F405RGT6
-IMU: 32K ICM20602 gyro/accelerometer (SPI)
-Baro: BMP280 (I2C)
-OSD: BetaFlight OSD w/ AT7456E chip
-Blackbox: MicroSD card slot (SD/SDHC)
-VCP, UART1, UART2, UART3, UART4, UART5
-Built in inverter for SBUS input (UART2-RX)
-PPM/UART Shared: UART2-RX
-SoftSerial on TX2, S5 or S6 optional
-Camera control on S6 or DAC optional
-Smartaudio & Tramp VTX protocol supported
-Battery Voltage Sensor: 1:10
-Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
-BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
-LDO 3.3V: Max.300mA
-I2C1 SDA & SCL: Yes
-WS2812 Led Strip : Yes
-Beeper : Yes
-RSSI: Yes
-3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
-6x PWM / DShot outputs without conflict
-2x 2812LED outputs option
-5x UARTs
-1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
-4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
-1x pair I2C1 pads
-1x Side-press button for BOOT(DFU) mode
-1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
-36x36mm PCB with 30.5mm mounting holes
-w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
-w/ 4pcs M3 Anti-vibration Standoffs

Package included:
1x Matek F405-STD Flight Control Board
4xM3 Flight Controller Soft Mount

Product Features

  • 【Fashion apperance】Nice layout makes for a very nice clean build especially together with the FCHUB-6S Hub PDB
  • 【Applied】16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection,All pins are well labeled and easy to solder
  • 【Convience】OSD feature can help you change pids in the field without a laptop
  • 【Without conflict】Built in inverter for SBUS input(UART2-RX),6x PWM / DShot outputs
  • 【Shookproof】Come with 4xAnti-vibration Standoffs,great solution to any flight controller vibration woes.