Motor KV: 1800KV RPM/V
Motor Resistance (RM): 0.0648 Ω
Idle Current (Io/10V): 1.3A/10V
Max Continuous Current: 28A
Max Continuous Power: 600W
Lipo Cell: 4S_6S
Motor Diameter: 30.2mm/1.19in
Motor Body Length: 35mm/1.38in
Overall Shaft Length: 51mm/2.01in
Shaft Diameter: 3.17mm/0.12in
Bolt holes spacing: 16mm/0.63in
Bolt thread: M2.5×6/M3×6
Motor Timing: 5deg
Drive Frequency: 8kHz
When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil.
- High magnetic energy NdFeB magnet steel-N45SH with 150 degrees heat-resistant.
- To support the high speed(up to 45000 spin), we used the Imported Japanese NMB Bearing and HRC55 degrees stainless steel Axis.
- Using the 220 size heat-resistant varnished wire enwinding the motor coil, support a larger current in 3D violent flight.
- Each rotor was balanced with high speed,ensure the motor high-speed runnung without shake.
- The wind-type rear cover design can reduce motor temperature with a big cloud of steam