Wednesday , August 21st 2019
    Build and Fly

BETAFPV Beta85X HD 4S Frsky Brushless CineWhoop Quadcopter with F4 V2 FC BLHeli_32 16A ESC Turtle V2 Camera OSD Smart Audio 5000KV 1105 Motor XT30 Cable for Cine Whoop Drone FPV Racing

Product Features:

    Specification Weight: 80.5g(without battery) Camera: Caddx Turtle V2 FC&ESC: F4 V2 FC BLHeli_32 16A ESC Motors: 1105 5000KV Props: Emax Avan 2'' 4-Blade Props Frame: Beta85X Frame and Carbon Fiber Stiffener Receiver: Frsky FCC Betafpv 450mAh 4S Battery(Not including) F4 V2 FC CPU: STM32F405(Overclock to 240MHz) Six-Axis: MPU6000 Size:…
Price as on: 2019-07-31 22:53:10
199.99  

Product Description

Specification
Weight: 80.5g(without battery)
Camera: Caddx Turtle V2
FC&ESC: F4 V2 FC BLHeli_32 16A ESC
Motors: 1105 5000KV
Props: Emax Avan 2” 4-Blade Props
Frame: Beta85X Frame and Carbon Fiber Stiffener
Receiver: Frsky FCC
Betafpv 450mAh 4S Battery(Not including)

F4 V2 FC
CPU: STM32F405(Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD(OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 is with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports is available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc

BLHeli_32 16A ESC
MCU:STM32F051K66
Supports PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3S-4S lipo
Cotinue current: 16A
Peak current: 19A
BLHELI_32 Firmware target: BETAFPV-16A-32bit

Caddx Turtle V2
Camera angle: 30° no adjustable
Aspect Ratio: 16:9(non-changeable)
TV system: NTSC
Video resolution: 1080P @ 60fps / 1080P @ 30fps / 720 @ 60fps

1105 5000KV Motor:
Weight: 5.5g/pc
Shaft: φ1.5mm
Motor Mount Holes: M2.0 on Dia 9.0mm
KV(rpm/V): 5000KV
Plug: Micro JST-1.25 3-pin connector

Recommend Parts:
F4 V2 FC & BLHeli_32 16A ESC: www.amazon.com/dp/B07MYZT48D
Beta85X Frame Kit: www.amazon.com/dp/B07TCGNLZF
1105 5000KV Motor: www.amazon.com/dp/B07SFHZSVT
Emax Avan 2” 4-Blade 1.5mm Shaft Props: www.amazon.com/dp/B07RXMJJSM
Turtle V2 Canopy: www.amazon.com/dp/B07QLPS8FP
BETAFPV 450mAh 4S Lipo: www.amazon.com/dp/B07RZ6PQPH

Package
1 * Beta85X 4S HD Whoop Drone(Without Battery)

Product Features

  • 【F4 V2 FC totally support 4S】Added receiver, ESC, led board, VTX pluggable ports, no need to solder, which is convenient for installation, decreasing the dislocated PIN mounting. Faster input signals with lower latency and higher update rate are reachable
  • 【BLHeli_32 16A ESC】Using single N-channel MosFETs on ESC board which has a lower inner resistance. Soldering with 25V/220uf electrolytic capacitor, reducing the defective rate caused by the instantaneous high voltage. Totally supports 4S POWER with a steady performance
  • 【Caddx Turtle V2 Camera】Beta85X 4S HD Whoop equipped with Caddx Turtle V2 1080p 60fps mini HD FPV camera, convenient operation since it supports WIFI function and has seperate OSD, you can operate on your phone by using the APP( CADDXFPV). Provides you with a visual feast with super clear video
  • 【1105 5000KV Motor&Recommend Battery】Upgraded 1105 motor from 6000KV to 5000KV, which is customized for 4S power. Gives you extreme power and speed. BETAFPV 450mAh 4S high rate lipo is recommended by default
  • 【Frame&Carbon Fiber Stiffener】Durable and light enough frame is designed for the Beta85X, added screws holes to fix the ESC, can prevent ESC from loosening and also solve the adverse wear and tear reaction from ESC and FC caused by vibration. With an extra stiffener brace of carbon fiber at the same time. Prevent the instability caused by too much power and punch when Beta85X is flying