What’s new with this tower?
The flight controller upgrade from SP racing F3 to Omnibus F4.
The 4in1 30A ESC upgrade to 4IN1 40A ESC with BLHELI-S firmware, which supports Oneshot125 , Oneshot42 and Multishot,Dshot150, Dshot300 and Dshot600.
EFM8BB21F16G MCU, pipe lined 8-bit C8051 core with 50 MHz maximum operating frequency.
Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is limited to 500k eRPM.
Two layers tower structure between 4in1 ESC and FC using quick pin connection.
Omnibus F4 flight controller, supports PPM,SBUS,SPEKTRUM 1024/2048 etc. remote control / receiving mode.
FC integrated OSD, also integrated 3.3V,5V,12V for VTX, camera, buzzer, LED and other peripheral devices ; provided several silicone cables for connectors on FC ,and will give you an unprecedented experience for installation.
BLHeli-S firmware. It designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot .
Supports Dshot150, Dshot300 and Dshot600. Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.
Support Voltage: 2-4S Lipo
Con. Current: 40A
Burst Current: 50A
F.C Volt: 3.3V/5V/12V
MCU of F4: stm32f405
Gyro of F4: MPU-6000 SPI
F4 Firmware: Betaflight_OMNIBUSF4SD
Flycolor Raptor BHeli-S 40A 4in1 ESC x 1
Omnibus F4 Flight Controller x 1
Connection Wires x 1
- Omnibus F4 flight controller, supports PPM,SBUS,SPEKTRUM 1024/2048 etc. remote control / receiving mode.
- 4IN1 40A ESC with BLHELI-S firmware supports Oneshot125 , Oneshot42 and Multishot,Dshot150, Dshot300 and Dshot600, which makes the anti-interference ability stronger.
- Dual-way signal transmission method to connect the flight controller and ESC greatly guarantee the signal stability.
- Built-in current meter, OSD directly display the real-time current without any additional connection.
- Exposed pads for battery and motor wires, fast welding without additional disassemble, makes the installation faster and more convenient.